Thompson CT500BT Instrucciones De Funcionamiento página 18

Connect a device
1) Turn on the unit first by pressing the STANDBY/TIME SET BUTTON.
2) Press the ALARM SET/FUNCTON BUTTON repeatedly until the "bt" indicator is shown on the
display
3) The BLUETOOTH icon flashes blue quickly.
4) On your Bluetooth device, enable Bluetooth and search for Bluetooth devices (refer to the device
user manual).
5) When [CT500BT] is displayed on your device, select it to start pairing and connect. If necessary,
enter the default password "0000". After successful pairing and connection, the product beeps and
the Bluetooth icon will appear as a steady light.
Note:
- Make sure that your Bluetooth device is compatible with this product.
- Before pairing a device with this product, read its user manual for Bluetooth compatibility.
- Make sure that the Bluetooth function is enabled on your device, and your device is set as visible
to all other Bluetooth devices.
- Any obstacle between this product and a Bluetooth device can reduce the operational range.
- Keep away from any other electronic device that may cause interference.
- The operational range between this product and a Bluetooth device is approximately 10 meters.
To disconnect the Bluetooth-enabled device:
• Press and hold the Play/Pause/Snooze button for three seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the communication range. The product beeps and the Bluetooth icon
flashes quickly.
To reconnect the Bluetooth-enabled device:
• Next time this product enters Bluetooth mode, it will reconnect to the last connected device
automatically; or
• On your Bluetooth device, select [i-box Glow] on your Bluetooth menu to start the connection.
Play from a Bluetooth device
After successful Bluetooth connection, press the Play/Pause/Snooze button to play audio on the
Bluetooth device.
Press the SKIP+ or SKIP- button to choose a track.
To pause or resume play, press the Play/Pause/Snooze button.
SETTING THE SCREEN'S BRIGHTNESS
By default, the weather station's screen is set to a bright display.
To adjust the brightness, press the DIMMER button repeatedly.
WIRELESS TEMPERATURE
This unit is equipped with a wireless temperature transmitter. Just put it outdoors and turn on the
power. The outdoor transmitter automatically connects itself after 1 minute. Otherwise, connect the
devices manually:
- In standby mode, press the Play/Pause/Snooze button for 3 seconds. Once the weather station
detects the sensor, the outdoor temperature and humidity is displayed. The sensor data is
automatically sent approximately every 3 minutes.
- Choice of temperature unit:
• In standby mode, Press the STOP button to select the temperature unit: Celsius or Fahrenheit.
- EN 7 -