OPERATION _ _________________________
Notes
Repeat the procedure section by
7
section.
If you have thick hair, you might
7
have to repeat this procedure on
the same section several times.
8 After use, switch the appliance off
by pushing the On/Off switch
The mode indicator LED
off. Then unplug the power cord
.
F
Notes
Never leave the appliance unat-
7
tended while it is plugged in.
Unplug the power cord after use.
7
Allow the appliance to cool in a
7
safe place.
Styling waves or curls
Caution
The housing of the appliance be-
7
comes very hot near the heating
plates. Do not touch the housing
near the heating plates.
Place the appliance on a solid,
7
flat, heat resistant surface. Do not
place the appliance on any soft
or uneven surfaces such as car-
pets, rugs or bedding and never
cover.
Make sure your hair is com-
7
pletely dry.
1 Plug the power cord
wall socket.
2 Switch the appliance on by push-
ing the On/Off switch
– The mode indicator LED
lights up in blue.
.
B
turns
C
3
Turn the temperature setting
wheel
to adjust the required heat.
Notes
Adjust to the lowest temperature
7
the first time you use it.
The appliance is able to reach
7
a maximum temperature in 60
seconds.
4 Comb or brush out a section of
your hair about 3 cm wide, start-
ing at the neck.
5 Place the section of hair between
the solid ceramic plates
close to the hair line as you can,
and then close them.
Caution
Do not touch the ceramic plates
7
as they are very hot.
F
between »+« and »–«
D
ENGLISH 2 3
into the
.
B
C
as
A