Publicidad
Idiomas disponibles
Idiomas disponibles
www.factorelectronics.com
IMPORTANT NOTE:
THIS OWNER'S MANUAL IS PROVIDED AS AN INSTALLATION AND OPER-
ATING AID. FACTOR ELECTRONICS SHALL NOT BE LIABLE IN TORT OR
CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR
DAMAGE ARISING FROM THE INSTALLATION, USE OR INABILITY TO USE
THIS PRODUCT.
Immediately upon receipt, inspect the unit and shipping container for indica-
tions of improper handling or in-transit damage. This equipment was carefully
inspected and tested before leaving the factory. Notify the Transportation Com-
pany, Wholesaler or Retailer immediately if any damage is found. Be sure to save
the carton and packing material as evidence of damage for later inspection. DO
NOT SHIP the unit back to the factory unless authorized to do so by the factory.
IN-TRANSIT DAMAGES ARE NOT COVERED BY THE WARRANTY. DO NOT
INSTALL OR ATTEMPT TO OPERATE THIS UNIT IF IT HAS BEEN DAMAGED.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE
THIS APPLIANCE TO WATER, RAIN OR MOISTURE. NEVER USE THIS
PRODUCT FOR LIFE SAFETY EQUIPMENT. TO PREVENT ELECTRIC
SHOCK, DO NOT OPEN.
CAUTION:
Risk of Electric Shock. Do not plug into another relocatable power tap.
To reduce the risk of electric shock, this equipment has a grounding type plug, that has a third (grounding)
pin. This plug will only fit into a grounding type outlet. If the plug does not fit into the outlet, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
IMPORTANT SAFETY INSTRUCTIONS:
Read and keep these instructions.
Heed all warnings and follow all instructions contained within this manual.
Clean only with dry cloth.
Refer all servicing to qualified service personnel. Servicing is required when the
unit has been damaged in any way, such as when the power-supply cord or plug
is damaged, when liquid has been spilt on it, when it has been exposed to rain or
moisture, when it does not operate normally, or when it has been dropped.
Operate the unit only with the voltage specified on the unit. Fire and/or electric
shock may result if a higher voltage is used.
Ensure that the safety ground terminal is connected to a proper ground.
SPECIFICATIONS:
1. "AC 120V 60HZ, 1800W"
2. Models FES-101B FES-101W
3. Outlet NO.8 Maximum Power 1200W
Specifications are subject to change without notice.
English pg.01
Electronics User's Manual
Publicidad
