Infiniton FGC-848HBW Manual De Instrucciones página 13

13
part ② by screws
pass connector
refer to step 3. (Please hold upper
door by hand when installing)
① Special flange screws
② Upper hinge
MODEL WITHOUT DISPLAY
① Special flange screws
② Upper hinge
③ Electrical connector
MODEL WITH DISPLAY
16. Connect electrical connector
as shown in the picture, then fix part
② ③
by screw refer to step 2.
① .Before fix part
③ through hinge
② ,
① electrical connector
②
② upper hinge cover
③ self tapping screw
17. Open the upper door, mount door
racks and then close it.
Note:
If your appliance has handle,you
have to reverse handle by follow
instructions below.
Remove the upper door and place it
on a smooth surface with its panel
upwards. Lever part
then loose screws
the picture. Change handle
right side, then install screws
part ① and part
①
-
MODEL WITH DISPLAY
① and part
② , as shown in
④ in turn.
① Handle covers
② Special screws
③ Handle
④ Screw hole cover
④ ,
③ to the
② ,