Broan-NuTone haven HVRFABL Instrucciones Para El Montaje Y Cableado página 9

1 . Entire system does not work –
• Make sure transformer is plugged into a working 120 volt wall outlet .
• If wall outlet is switched, make sure it is turned on .
• Make sure the branch circuit breaker is not tripped .
• If transformer is so equipped, make sure its power switch is turned on and timers are properly
programmed .
• Make sure the Vaporizer circuits are connected to the transformer .
• If the system is equipped with a photocell sensor, make sure it's located away from bushes, other
obstructions and away from artificial light sources .
2 . Vaporizer of individual fixtures does not
work -
• Make sure the wire adapter in each connector is installed and properly sized for the cable in use .
• Make sure the connector locking ring is fully tightened .
• Make sure fixture wires are completely inserted into the connector
3 . Repellent not working -
• Make sure cartridge is properly installed and undamaged .
• Make sure cartridges contain repellent .
• Make sure top and bottom vents of the fixture are unobstructed .
• Make sure the fixture has power . Green LED will be lit when the repellent system is on .
Broan-NuTone LLC
926 W . State Street
Hartford, WI 53027
IN U.S.A. CALL:
Customer Service: Technical Support:
1-888-336-3948 1-888-336-6151
IN CANADA CALL:
1-877-896-1119 9