Portfolio 17983-001 Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Unscrew canopy nuts (D) from fixture assembly (B)
and detach mounting bracket (A). Attach mounting
bracket (A) to the junction box (not included) with
junction box screws (AA).
Note: The preassembled screws on mounting
bracket (A) should protrude out from the junction box.
Hardware Used
Junction
AA
Box Screw
2. Attach shades (C) to socket cups on fixture
assembly (B), securing with preassembled socket
rings inside the shades (C).
3. Install light bulbs (not included).
Use 60-watt max. E26-base incandescent bulbs
or 13-watt max. E26-base CFLs.
4. Make electrical connections using wire connectors
(BB). Refer to ELECTRICAL CONNECTIONS in
the Safety Information section on page 3.
Hardware Used
BB
Wire Connector
5. Place the fixture assembly (B) against the
mounting surface, allowing the preassembled
screws on mounting bracket (A) to pass through
the canopy of the fixture assembly (B).
Secure with previously removed canopy nuts (D).
1
x 2
2
3
4
x 3
5
4
C
B
BB
D
Lowes.com/portfolio
A
AA
A
B