Veho Smartfix VFS-014-SF Manual De Instrucciones página 4

English
2. Press the power button to turn the power on.
3. Press the Film Type button to select the correct mode for the slide/negative in the holder.
4. Insert the slide/negative holder into the right hand side of the scanner, as indicated by the p
symbol on the scanner and the slide/negative holder.
6
x1
x2
x3
x4
x5
5. Align the slide/negative holder in the scanner using the LCD screen on the front.
6. Press the copy button to scan the slide/negative into a digital image. To get the best result, wait
for 3-4 seconds for the scanner to adjust the brightness for each slide/negative before pressing
the copy button.
7. After the brightness has automatically been set, you can manually adjust the exposure of the
image before scanning. Press the EV/Delete Button to adjust the exposure Value (EV), then
use the Up to Down button to adjust from +2EV to -2EV in increments of 0.5. The value of
EV adjustment is shown at the bottom of the LCD screen.
8. Once you have scanned the first image in the holder, move the holder to the next position
and repeat until you need to put new slides/negatives into the holder.
English
7