Kurzanleitung - nedis WIFIACMB1WT7 Guia De Inicio Rapido

other than those recommended by the manufacturing company.
• Do not puncture or heat any part of the refrigerant circuit.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
Installing the product
- Place the product on a stable and flat surface.
-
Only move the product in an upright position.
-
Leave a minimum of 0.5 m space around the air inlet and outlet
to allow a good circulation of airflow.
-
If the product has been tilted, allow it to stand upright for 2
hours before plugging it in.
-
Only install, operate and store the product in a room with a floor
area above 7 m .
2
-
Keep the product at a distance from flammable objects such as
furniture, curtains and similar.
- Do not block ventilation openings and make sure that there is
enough space around the product.
Assembling the exhaust (image C)
- Only use the provided exhaust hose.
-
Do not block the exhaust hose, this may cause overheating.
1. Assemble the exhaust hose A
exhaust hose connector A
y
2. Slide A over the air outlet A
y
3. Extend A
5 up to 1500 mm.
- Do not twist the exhaust hose.
-
Ensure that the exhaust hose does not kink.
4. Assemble the window kit A
5. Install A 6 in the window opening.
6. Tighten A .
7
7. Snap A into A
4 6 and fasten with the exhaust nozzle screw
A
i .
Place the product on a flat and dry surface.
4
Assembling the continuous drainage (optional)
1. Open the continuous drainage outlet A
2. Connect A to a water container or drainage system (not
r
included).
Installing the Nedis SmartLife app
1. Download the Nedis SmartLife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis SmartLife app on your phone.
3. Create an account with your mobile phone number or your e-mail
address and tap Continue.
4. You will receive a verification code on your mobile phone or
e-mail address.
5. Enter the received verification code.
6. Create a password and tap Done.
7. Tap Add Home to create a SmartLife Home.
8. Set your location, choose the rooms you want to connect with
and tap Done.
Adding the product to the SmartLife app
(image D)
1. Switch on the product.
2. Tap + in the Nedis SmartLife app.
3. Select the device type you want to add from the list.
4. Confirm the Wi-Fi indicator LED B
product during standby mode: Press and hold the fan speed
button B for 5 seconds until the product emits a tone and B
8
starts blinking.
5. Follow the instructions in the Nedis SmartLife app.
Make sure you connect the product to a 2.4 GHz Wi-Fi network.
4
6. Rename the product after it has been found and added.
7. After confirming you can control the product with your
smartphone.
5 , the exhaust nozzle A 4
.
e .
with the fasteners A
6 7 .
r .
6 is blinking fast. Or reset the
To connect your SmartLife account to Amazon Alexa and/or Google
Home, set it up using the "Smart Life" action or skill. For more details
check the instruction on either Amazon or Google.
Using the control panel and remote control
(image B)
Button
Mode indicators B
Timer button B
Up button B
Down button B
Temperature indicator
B
5
Power button / Wi-Fi
indicator LED B
Fan mode button B
Fan speed button B
and the
Sleep mode button B
Power button B
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
WIFIACMB1WT7 from our brand Nedis
tested according to all relevant CE standards and regulations and
that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/wifiacmb1wt7#support
For additional information regarding the compliance, contact the
customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
c

Kurzanleitung

WLAN-Smart-Klimaanlage
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/wifiacmb1wt7
Bestimmungsgemäße Verwendung
Die Nedis WIFIACMB1WT7 ist eine lokale Klimaanlage zum Kühlen
und Entfeuchten von Räumen.
Das Produkt ist ausschließlich zur Verwendung als lokale
Klimaanlage für den Hausgebrauch zum Einsatz in Innenräumen
gedacht.
6 Das Produkt ist nicht für den professionellen Einsatz gedacht.
Kinder ab dem achten Lebensjahr und Personen mit
eingeschränkten körperlichen, sensorischen oder geistigen
Fähigkeiten oder ohne ausreichende Erfahrung und Kenntnis dürfen
dieses Produkt nur dann verwenden, wenn sie beaufsichtigt werden
6
Function
Indicates the current fan mode.
1
Press to set the timer. Use B
2
B
4 to set the duration of cooling.
Increase values.
3
Decrease values.
4
Indicates the current temperature.
Switch the product on or off.
6
Repeatedly press the button to
7
select the mode: Cooling mode /
Dehumidifying mode / Fan mode.
Press repeatedly to select the fan
8
speed.
Activate sleep mode. Only works in
9
cooling mode. After one hour the set
temperature increases 1 °C and again
after 2 hours.
Switch the product on or off.
q
, produced in China, has been
®
3 and
WIFIACMB1WT7