Technical Specifications - Kärcher FC 3d Cordless Manual De Instrucciones

Rollers do not turn
Rollers are blocked.
 Remove rollers and check if an object has become
stuck in the rollers.
 Check that the rollers are screwed in as far as they
will go onto the roller holder.
 Check that the floor head cover is correctly seated.
For this, remove the cover and then fit it back in
place.
Water vacuuming not optimum
Floor head cover not installed correctly
 Check that the floor head cover is correctly seated.
For this, remove the cover and then fit it back in
place.
The rollers are worn out.
 Replace the rollers.
Appliance is leaking waste water.
Waste water tank is overfilled.
 Empty the waste water tank right away.
Waste water tank does not fit properly in the appliance.
 Check that the floor head cover is firmly seated on
the waste water tank.
 Check that the waste water tank flaps are correctly
closed.

Technical specifications

Electrical connection
Voltage
Protection class
Device
Protective class
Charger protection class
Rated power of appliance
Nominal battery voltage
Battery type
Operating time with full charge
Charging time for empty battery
Charger initial voltage:
Output current, charger
Performance data
Roller revolutions per minute
Filling quantity
Fresh water tank
waste water tank
Dimensions
Weight (without accessories and
cleaning fluids)
Length
Width
Height
Cable length
Charger
Subject to technical modifications!
100-240 V
1~50-60 Hz
IPX4
III
II
40 W
7,2 V
Li-Ion
20 min
4 h
9,5 V
0,6 A
500 rpm
360 ml
140 ml
2,5 kg
305 mm
226 mm
1170 mm
1800 mm
EN
– 14
31