Phonocar VM407 Manual Del Usuario página 6

VM407
EN
Features
Bluetooth 4.1 with A2DP and AVRCP profiles
Signal range ≥ 8 m
Integrated microphone
APT-X audio technology
Impedance 32 Ohm
Operating temperature: 0/60°C
Battery life in standby mode 150 h
Battery life music playback 10 h
Battery life calls 15/20 h
Charging with micro USB cable ->USB
Battery charging time 3 h
Dimensions: 21x16x5 cm
ADJUSTABLE HEADBAND (1)
LED (2)
DURING CHARGING
-steady RED = battery charging
- LED off = battery charged
USE
NB: Before using the headphones for the first time charge the battery to 100%.
BATTERY CHARGING
- Connect the headphones to a USB charger or to the USB port of your laptop with the supplied micro USB cable.
- The LEDs (2) will light up red. Charging is complete when the LEDs switch off.
TURNING ON AND OFF
To turn the headphones on and off, press and hold the Multi-function button (3) for 4 seconds.
Supplied:
1 VM407 headphones
1 micro USB cable ->USB for charging
1 audio cable Jack 3.5
WARNINGS
Do not expose the headphones to direct heat and do not use it at
temperatures below 0°C.
Do not immerse the headphones and its components in water and/or
liquids. To clean the headphones, use a cotton cloth dampened with
lukewarm water or mild detergents.
DURING USE
- BLUE and RED flashing =device connection in progress
- BLUE flashing = headphones and device connected,
but no data transmission.
- BLUE steady = data transmission in progress
6