D+H SHD 54/450-V Manual Original página 4

WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this product.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Safety notes
Safety extra low voltage 24 V DC!
Do not connect directly to the mains supply!
- Connection has to be carried out only by an
authorized electrical specialist
- Danger of violent pressure in handaccessible area
- Keep away people from the operating area of
the drive
- Keep away children from the control
- Use only in dry rooms
- Only for inside mounting
Use rain detector with danger of rain
- Just use unchanged original D+H parts
Observe enclosed red safety slip!
Technical data
Type
Observe double current consumption for the „-BSY+ Set" version!
Rated voltage
Performance
Push/ pull force
Clamping force
Runtime-OPEN
Runtime-CLOSED
Lifetime
Duty cycle
Fire stability
Housing
Ingress protection
Temp. range
Emission sound pressure level
4/16
SHD 54/450-V /-BSY+
Intended use
- Chain drive for electric opening and closing of
- Operating voltage 24 V DC
- Useable for smoke ventilation, D+H Euro-SHEV
Performance features
- Microprocessor controlled synchro electronics
- Individually programmable via software SCS
- Electronic limit stop and overload cutoff
- Locking relief after closing
Extent of supply
Drive unit with 2,5 m silicon-cable,
mounting template and bracket set.
SHD 54/450-V /-BSY+
24 VDC, ± 15%; 1A
24 VA
500 N + ca. 20 % switch-off reserve (temporary)
ca. 250 N
ca. 12 mm/s
ca. 12mm/s
>20 000 double strokes
30 % (With cycle time 10 min.)
30 min. / 300°C
Aluminium powder-coated (~RAL 9006)
IP 50
-5 ... +75°C
LpA ≤ 70 dB(A)
Deutsch
side hung sashes up to 65°
according to DIN EN 12101-2 as well as daily
natural ventilation
BSY+ for a precise synchronous run
99.824.43 1.5/08/19