Publicidad
Idiomas disponibles
Idiomas disponibles
Important! Keep instructions for future reference.
EN
Introduction
Please take a few minutes to read these instructions to enjoy the full safety benefits of your purchase.
This box contains:
a) 2 x
f ) 4 x
k) 2 x
b) 2 x
g) 4 x
l) 2 x
c) 4 x
h) 1 x
m) 1 x
d) 1 x
i) 8 x
n) 1 x
e) 2 x
j) 2 x
o) 1 x
If any component parts are missing or damaged, do not use your gate. Replacement parts can only be
obtained from the manufacturer or distributor. (1A+1B)
Where to fix your Dog Barrier Gate?
Your Dog Barrier Gate is ideal for restricting access to any room in your home from kitchens to bedrooms and
may be used to span hallways, doorways or appropriate stairways.
Notes on staircase positioning
Warning: The position of your Dog Barrier Gate in relation to the stairs is very important for your dog's safety.
Your gate may be better positioned across your landing to prevent access to the stairs completely. If you do
require your gate to be positioned at the top of the stairs to prevent your dog descending, the gate must be
fitted on the very top stair. When descending the stairs, the gate should always open towards you (away from
the stairs). If you intend to use the gate at the bottom of the stairs then it must be placed on the lowest stair,
towards the front of the step, away from the 2nd step. (2)
Getting started
Check the width of the opening where you intend to fit your gate. The smallest opening is 84 cm and the
largest opening is 152 cm. IMPORTANT: Do not attempt to use this gate in openings larger than 152 cm.
First you must determine the correct size. You should set the gate as wide as possible in your doorway. (3)
Then assemble the 2 main gate sections with the 4 connecting bolts and 4 connecting screws (F+G). (4) . Use
the assembly key (D).
Fixing your hinges and catches
Please use the templates (B1 for part A+B, B2 for part C + D, see picture 13) to mark the drilling position
for your pilot holes (for a perfectly vertical mounting, you may wish to use a spirit level). (5)
Then assemble all the plastic brackets using the self tapping screws according to the marked holes. (part A:
6, 7, 8 + 9), (part B: 10), (part C & D: 11 + 12)
p) 1 x
q) 1 x
r) 1 x
Wood fixing
Drill 2 mm pilot holes and use the wood screws provided screwing directly into the wood.
Plaster wall fixing
Drill 6 mm (1/4") holes and insert the wall plugs provided before screwing into these.
Hollow plaster board walls
Hollow walls constructed of plaster board require special fixing (not supplied) and you will need to
purchase expandable wall plugs (available at DIY stores).
Ensure that when your gate is fitted the bottom bar is between 4.5 cm and 6.5 cm from the floor.
Safety tips
• Pets still need supervision and should not be left alone until they become familiar with the Dog
Barrier Gate.
• A daily check on the gate is recommended to ensure that your gate remains securely fixed.
• Ensure that the gate is properly closed at all times.
• The gate is designed for indoor use only.
• A swinging gate can trap small hands.
• The gate may only be used for dogs and not for children.
• Do not remove the safety notices, you may not always be the user.
• Retain these instructions as you may wish to reposition the gate.
• Warning: incorrect fitting or positioning of this Dog Barrier Gate can be dangerous!
• Warning: do not use the safety barrier if any components are damaged or missing!
• Warning: the Dog Barrier Gate must not to be fitted across windows!
Cleaning
Simply wipe with a soft damp cloth.
Savic cannot be held responsible for damage to property incurred during installation of your gate.
EN
Publicidad
