Safco 5124 Instrucciones De Montaje

ASSEMBLY INSTRUCTIONS
READ THESE INSTRUCTIONS BEFORE STARTING;
FOLLOW THE ASSEMBLY PROCEDURES CAREFULLY
LETTER
DESCRIPTION
CODE

A Back Loop

B Base Loop

C Platform

A
SNAP BUTTONS ON BACK
OF LOOP

B
Thank you for purchasing this Safco product.
Due to continual upgrading of our products,
photographs or illustrations may not reflect
actual (exact) appearance of product.
For questions or concerns, please call
Safco Consumer Hot Line
1-800-664-0042
available Monday-Friday
7:30 AM to 5:00 PM (Central Time)
(English-speaking operators)
100512437: 1 of 2; Rev A; Rev Date 01-SEP-2016
Stand-Alone Footrest
PARTS LIST
QTY. PART NO.
1 5124-02
1 5124-03
1 5124-01
HOLES ON FRONT
OF LOOP
WIRE PRONGS

C
This product functions as a high-range, heavy-duty footrest. It relaxes tired
feet, and provides added comfort and relief by alleviating pressure on thighs
while accommodating high work surfaces. A large base reduces the chance
of tipping. The non-skid surface keeps feet from slipping. Height is adjust-
able over an 9-1/2" range.

1
Insert the A Back Loop into the sockets in the B Base Loop,
with the snap buttons on the back loop facing outward. Push
back loop down until the snap buttons snap into the holes in
the sockets of the base loop.

Grasp the C Platform by the sides, with the wire prongs
2
away from you. Tilt the platform front up, and line up the wire
prongs on the platform back with the desired set of holes in
the back loop.
Insert the prongs into the holes, and tilt the platform down until
3
its back surface rests flat against the back loop.
To change the footrest height, lift the front of the platform until
the prongs can be disengaged, then reinsert into new position
as before.
GENERAL SAFETY INSTRUCTIONS
•This product is designed as a footrest, not a stepstool or chair; do not
sit or stand on the platform.
•This product must be on level surface to ensure proper stability.
•Only use this product when fully assembled.
•Never use this product if it does not perform according to this sheet.
•Immediately report any problems to Safco and always give the
manufacturer's date code information from the carton.
Safco Products Company, Minneapolis, MN 55428
MODEL NUM-
ASSEMBLED UNIT
Model 5124
5124
BER
