DAYRON 26112 Manual De Instrucciones página 14

lntroduction
Before using your Kettle for the first time
Read the safety instructions in this manual befare operating. Befare using this
appliance far the first time, fallow the steps below:
1.
2.
lock the lid in place so as it is on securely.
3.
indicate that the water is heating.
4.
5.
Using the Kettle
Put the kettle base on a flat, heat resistant surface.
Remove the lid and fill the kettle with clean
level indicator and ensure the water is between the MIN and MAX
Securely lock the lid in place.
Place the kettle on the base.
Turn the switch to the ON Position. The switch will illuminate to indicate that the
water is heating.
When the water has boiled, the kettle will turn off automatically.
The water will be very HOT. Take care to avoid burns.
NOTE:
WARNING: DO NOT
SPECIAL SAFEGUARDS
Stand the kettle on flat, level, heat resistant surface. Do not use or keep the
kettle outside.
Do not store the kettle near hot ovens or heating
kettle can get
way.
Use only cold water when filling the kettle.
The water level must be between the
befare removing it from the
Always ensure that the lid is tightly closed
The base and exterior of the kettle must not become wet. The kettle body must
be used with the kettle
AW_26112_Userguide_VO1_2020
Stand the kettle on
Remove the lid and fill the kettle so that it is half full. Securely
Turn the switch to the ON
When the water has boiled, the kettle will turn off automatically.
Empty the boiled water from the kettle.
open the lid when pouring water from the
hot, to avoid burns do not touch. Never modify the kettle in any
base.
base.
flat, level, heat resistant surface.
position. The switch will illuminate to
water.
and MAX
MIN
.
DO NOT overfill! Use the water
markings.
kettle.
appliances. Certain parts of the
mark. Switch the kettle off
14