Metal Works HNFJ2T Manual página 7

HNCRT - NLFRENES - v4.0 - 30062013
EN
3 Operating instructions
 Use the handle (C) to pull the direction latch (D) up
• Use the handle (C) to pull the direction latch (D) up until it clicks
until it clicks into place;
into place.
 Hold the beam (F) steady and pull the operating
• Hold the beam (F) steady and pull the operating lever (E)
lever (E) downward, (or forward if used horizontally);
downward, (or forward if used horizontally).
 Continue to pump the lever;
• Continue to pump the lever.
 When the load is lifted to the required height, set
• When the load is lifted to the required height, set the lever in
the lever in the upright position and engaged the
the upright position and engaged the clip (G) onto the beam.
clip (G) onto the beam;
• Place a ½" high stress bolt (not supplied) through the hole
 Place a ½" high stress bolt (not supplied) through
immediately below the lifting mechanism to act as a safety pin,
the hole immediately below the lifting mechanism to
or use a jack stand.
act as a safety pin, or use a jack stand;
• To lower a load, push the direction latch down (still use the
 To lower a load, push the direction latch down (still
handle (C), pump the lever (the load must be a min. 75 kg).
use the handle C), pump the lever (the load must
be a min. 75 kg).
4. C
LEANING AND MAINTENANCE
4 Cleaning and maintenance
 The jack does not require special maintenance, but it must be kept well lubricated;
 Inspect the jack before use for damage and cracks, and do not use it if it is not in proper
• The jack does not require special maintenance, but it must be kept well lubricated.
condition;
• Inspect the jack before use for damage and cracks, and do not use it if it is not in proper condition.
 Front and back of the rail must be kept rust free, do not use it when rusting happened.
• Front and back of the rail must be kept rust free, do not use it when rusting happened.
Changshu Tongrun Auto Accessory Co., Ltd.
Address: New Longteng Industrial Park, Changshu Economic Development Zone, Jiangsu Province,
P.R.China.
Changshu Tongrun Auto Accessory Co., Ltd.
®
Page 2 of 2
7