Boer Temper Koban KTM 02 Manual De Instrucciones página 6

KTM 02
Analogic thermostat
Installation
1. Select the position where can
reflect the average temperature
of the whole regulating area, no
near to place with too much or less
ventilation, such as door, window,
corner, or intake of exhauster, no
next to the heating or cooling
source.
2. Remove the knob (Fig.1), loosen
and remove the screw (Fig.2)
3. Remove the cover, and fix the base
(Fig.1
)
Instructions manual |
(Fig.2
)
Circuit Diagram
6
assembly to the wall (Fig.3)
4. Remove the wire protector.
5. Following the wire diagram,
connect the circuit. (Fig.4)
6. Install the wire protector.
7. Install the cover, tighten the screw,
and install the knob.
(Fig.3
)
(Fig.4
)
www.grupotemper.com