Replacing The Consumables; Cessation And Wintering; Reconnection - QISTA BAM Guia De Instalacion

Replacing the consumables

1
The CO filter
2
To replace the CO filter, unscrew the cartridge
2
counterclockwise The cartridge to be unscrewed
is located at the base of the filtration block.
Next, unclip the old filter from the cartridge.
Clip the new filter onto the cartridge, then screw it
back on clockwise
The capture net
The capture net must be replaced when it has a
hole We recommend that you replace your net on
average once a year To empty the capture net,
pick it up by pinching the top of the net in order
to prevent mosquitoes escaping Then empty the
net after shaking it to neutralise any mosquitoes
which are still alive
If you are purchasing consumable packs for the whole season, please follow the storage
instructions. Make sure that you follow the maintenance instructions indicated on the lure
label. To store the CO bottle, make sure that it is properly closed. Store the CO
2
well-ventilated space away from direct sunlight.
22
The lure
To replace the lure, unscrew the black chimney cap
and then position the open lure box in such a way
that the white plastic part with holes is visible
The lures must be kept at room temperature The
temperature must be constant The lures can be
kept for a year as long as the box remains closed
The CO bottle
2
Page 18
Please consult this manual for
instructions on replacing the recycled CO bottle
2
bottle in a
2

Cessation and wintering

2
Once the season is over, the time has come to
winter the trap. This is how to do it:
1 Turn off the trap from the application
by pressing the OFF button, and then
disconnect it from the power outlet
2 Remove the consumables and close the lure
box (hermetically, using adhesive tape if
possible)
3 Store the trap indoors (garage, garden shed,
etc ) or in a sheltered location
4 Cover it with tarpaulin or a sheet to prevent
insects or other pests making their nest
there for winter They risk damaging the parts
or taking shelter in the machine's pipes and
therefore blocking them

Reconnection

3
1 Position your trap in the place advised in the
set-up assessment again
2 Plug the trap into your household socket
3 Place the lure box in the hood and the CO
2
bottle in the trap Adjust the CO flow.
2
4 Turn on the trap by reprogramming it to the
recommended mode
3 Check that all the elements are working
properly! Test the CO flow and check
2
the ventilators
English
You can find protective covers for
wintering your trap on our website
Qista.com.
Protective cover
Cleaning
4
Your traps are located outdoors and as a result
become soiled by natural phenomena (dust,
sap, resin, bird droppings, rain residue, etc )
They are very easy to clean First, wash the trap
using a sponge and soapy water (you can also
use your usual multi-purpose household cleaner)
If the trap is very dirty, repeat the operation Then
rinse using clean water, dry, and your trap will be
as good as new!
What to do if there are resin or sap stains? Just
rub the stain using a cloth soaked in turpentine or
white spirit Afterwards, remember to clean using
soapy water and dry the part in question
23