Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
V ~
Volt (AC)
W
Watts (effective power)
Safety class II
Risk of fire!
Drill sharpener PBSG1
©
Introduction
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical power
tools correctly. To help you do this please read the
accompanying operating instructions. Keep these
instructions in a safe place. If you pass the device
on to anyone else, please ensure that you also pass
on all the documentation.
©
Proper use
The device is designed to sharpen steel drill bits
according to DIN 338, DIN 340, DIN 345,
DIN 1869 and DIN 1897 (MODEL Type N).
Carbide drill bits must not be milled with this device.
Any other use or modification to the device shall be
considered as improper use and could give rise to
considerable dangers. The manufacturer will not
accept liability for loss or damage arising from
22 GB/MT
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
For indoor use only!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Risk of explosion!
Keep children away from electrical
power tools!
Dispose packaging and appliance in
an environmentally-friendly way!
improper use. The device is not intended for
commercial use.
©
Description of parts and features
Sharpening head
1
Ventilation slot
2
Motor unit
3
ON / OFF switch
4
Rubber foot
5
Motor unit screw
6
Sharpening stone cover screw
7
Sharpening stone cover
8
Sharpening head push rod
9
Motor unit push rod
10
Drill guides
11
©
Scope of delivery
1 Drill sharpener PBSG1
1 Carrying case
16 titanium-coated HSS drills
2 spare sharpening stones
1 Set of operating instructions
Publicidad
Capítulos
Tabla de contenido
