Yokis HUB Guía De Puesta En Servicio Rápida página 11

Step 4: Exit learning mode
▶ Hold symbol
on the the YOKISHUB pressed for 3 seconds.
The wireless LED
learning mode.
▶ To add new modules to the Bus Radio at a later time, if required, repeat the procedure
starting from Step 1.
NOTE: In step 3, simply add only new modules to Bus Radio.
Step 5: Associate YOKISHUB to the YnO App
Ask the customer to:
▶ Start the App
▶ Connect the App
To associate the YnO App to the YOKISHUB:
URMET S.p.a., Via Bologna 188/C, 10154 Torino - Customer Service: +39 011 23 39 810
Export Dept. Phone: +39 011 24 00 250/256 - Fax: +39 011 24 00 296 - www.yokis.com
will flash rapidly to indicate that the YOKISHUB is no longer in
using his or her Username and Password.
to the YOKISHUB.
Scan the QR code
and watch the
video
▶ When adding a new module, in order to allow system
update on the App, it is necessary to disconnect and
reconnect to
visible on the App.
DS1054-043
3 seconds
Find out how your customer can
create a YnO Account and asso-
ciate it with the YOKISHUB.
. Only in this way the new modules will be
11