Kooduu SYNERGY PRO Serie Manual De Instrucciones página 4

Introduction
Dear Customer,
Thank you for purchasing our Kooduu Synergy PRO. We hope you enjoy
listening to your favorite tunes whilst enjoying your new designer lamp and
cooler in one.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must
observe these operating instructions!
These operating instructions are part of this product. They contain
important notes on commissioning and handling. Also consider this if
you pass on the product to any third party. Therefore, retain these
operating instructions for reference!
All company names and product names are trademarks of their respective
owners.
All rights reserved.
1.Intended use
This Kooduu Synergy PRO is intended to be used as a lifestyle product.
The product serves as a multifunctional speaker and light. Its top chamber can
be used for chilling wine or used as a planter.
Any use, other than described above, can damage the product. Additionally,
this is connected to dangers, such as short circuit, fire, electric shock, etc.
No part of this product must be modified or converted!
Read these operating instructions completely and attentively; they contain
important information on setup, function and operation. Always observe the
safety information!
The included power adaptor is for INDOOR charging only.
2.Box contents
• Floor Bluetooth speaker and LED light
• Operating Manual
• USB cable
• USB charger
• Support Stands
• Screws
EN 2
3.Safety information
The warranty/guarantee will expire if damage is incurred resulting from non-
compliance with these operating instructions. We do not assume any liability for
consequential damage!
Nor do we assume any liability for damage to property or personal injury caused
by improper use or failure to observe the safety information. In such cases the
guarantee/warranty will expire!
The following safety information is intended not only for the protection of your
health but also for the protection of the device. Please read the following
carefully:
The unauthorized conversion and/or modification of the product is inadmissible
for safety and approval reasons.
The product is only suitable for dry areas. Do not expose it for long periods of
time to direct sunlight, heat, cold, dampness or wetness; otherwise, it may
cause damage to the product.
There is danger of fire or potentially fatal electric shock. If this is the case, first
shut down the respective socket (e.g. switch off circuit breaker) and then pull
the power adaptor from the socket. Disconnect all cables from the device. Do
not operate the product anymore afterwards, but contact your local dealer or
get in touch with us at https://www.kooduu.com/return-policy/
Do not place any open sources of fire, such as burning candles, on the device.
Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
Note: The handle and aluminum ring are not waterproof and need to be
kept dry at all times.
This product is not a toy and not suitable for children. Children cannot judge the
dangers involved when handling electrical devices.
Do not leave packing material unattended. It may become a dangerous toy for
children.
Also observe the safety and operating instructions of any other devices that you
connect to the speaker.
4.Product overview
Keys function & Bottom
A1 On/Off switch
A2 USB charging port
Charging
B1 USB cable
B2 USB charger
Assembly Parts
C1 Support Stands
C2 Screws
LED indicator
D1 Charging LED
D2 Mode LED
D2 D1
5.Setup mono speaker (single-unit) connection.
5.1
Step 1:
Before first use, turn off the Bluetooth function of any other Bluetooth devices
near the speaker.
Step 2:
Press the On/Off key for about 3 seconds on the unit. You will hear a start-up
sound and the blue LED indicator light will fast flash.
Step 3:
N o w t u r n o n " B l u e t o o t h " o n y o u r m o b i l e p h o n e a n d s e a r c h f o r
"Synergy(35/50/65) PRO" on discoverable devices in your Bluetooth menu and
pair with the unit.
Step 4:
You will prompted for a code. The code is "5 6 3 8"
Step 5:
After you hear the connection sound "beep" the product is successfully paired.
This can be confirmed by the CONNECTED sign/wording on your smart device.
Step 6:
The Blue indicator light will become solid Blue. You can now play your favorite
music.
EN 3