Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
!
!
Extreme caution is necessary when any heater is used by or near children or
•
invalids and whenever the heater is left operating and unattended.
Do not install the fireplace directly on carpet or a similar surface, which may
•
restrict air circulation beneath the unit.
Always unplug fireplace when not in use.
•
To disconnect fireplace, turn controls to off, then remove plug from outlet.
•
Do not use outdoors.
•
This fireplace is not intended for use in wet locations, such as bathrooms,
•
laundry areas and similar indoor locations. Never locate fireplace where it may
fall into water container.
Do not operate the fireplace with a damaged cord or plug, or if the fireplace has
•
malfunctioned, or if the fireplace has been dropped or damaged in any manner.
Return fireplace to authorized service for examination, adjustment or repair.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
•
the like. Arrange cord away from traffic area and where it will not be tripped over.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening
•
as this may cause an electric shock or fire, or damage the firebox.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do
•
not use on soft surfaces, like a bed, where openings may become blocked.
All electrical heaters have hot and arcing or sparking parts inside. Do not use it in
•
areas where gasoline, paint, or flammable liquids are used or stored or where the
unit will be exposed to flammable vapours.
!
!
!
!
!
!
INSTALLATION
This section provides step-by-step instructions for installation of your
fireplace.
WARNING
The socket must be 15A/120V.
I.
This fireplace is designed to be able to hang on solid walls or insert into
a wall hole after proper construction. Select a suitable location, which is
not susceptible to moisture, safe, dust free, away from high traffic and
away from things may catch fire or block openings such as drapes,
furniture, etc.
II.
The fireplace must be installed at a suitable position where at least
50cm above the floor and no higher than 180cm.
NOTE
It is a good idea to place your fireplace near an existing socket,
for ease of electrical hook up.
III.
There is 4 keyholes on the back side of the fireplace casing, place the
mantel in the desired location and drill 4 holes according to the position
of the 4 keyholes. Then insert 4 =^EDBFG?B!P?HCF Use strong screws to
fix it on the wall, each of the screw needs to come out of the wall for
8mm, ensure that the screw are well fixed then lift the fireplace and
make the keyholes a little higher than the screw's position, then make
the screws slide slowly into the keyholes until it take the whole weight of
the fireplace.
7K!
!
7L!
Publicidad
Tabla de contenido
