Setting The Control System - Baxi EH784 Manual Del Usuario

Fig.32
L1 L2
2
N
L2
L1
7687984 - v02 - 25012018
X25
N
MW-1001124-1
1.5.3
When the installation is first switched on, refer to the chapter "Using the
installation assistant for the control panel" in the Installation Manual for the
heat pump.
1 Reversal valve and domestic hot water sensor
2. Fit the connector onto the wires.
L L 1 Black: control voltage
L2 Brown: continuous voltage
N Blue: neutral
Important
The connector is fitted on the PCB.
In this case, the connectors supplied in the documentation bag are
not necessary.

Setting the control system

1. Select the desired installation type:
Tab.8
Installation type
1 direct heating circuit and 1 domestic hot water
tank
1 direct heating circuit and 1 domestic hot water
tank and 1 underfloor heating circuit with mixing
valve
1 direct underfloor heating circuit and 1 domestic
hot water tank
See
Heat pump installation manual.
en
No.
02
04
06
29