Descargar Imprimir esta página

Premium PWC235RQ Manual De Uso Y Cuidado página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Features
1.Modern design.
2.Energy-saving, low noise, resistant structure and great stability. Suitable for use in
homes, hotels, schools, etc.
3.The plastic parts of this product are made of high quality and durable plastic.
4.Double security system, "temperature control " and "heating protection". Hot water
temperature is always between 80 ° C and 95 ° C, enough to make coffee or tea, or
other instant food.
5.The water dispenser's cooling system is durable and suitable for use during the
summer.
6.This product can be used with bottled water or a water purifier.
Parts scheme
Bottle Seat
Power Switch
Indicator Lights
Information Plate
Cold Water Faucet
Note: The graphic is for reference only. The current
differences with the graphic.
Mode of Operation
1.Insert the bottle vertically on the seat and press the water faucets until water flows
out of the red hot water faucet.
2.Insert the power plug to the wall socket and turn the electric switches to ON position
to start the appliance. DO NOT MOVE BOTH SWITCHES AT THE SAME TIME.
Cooling and heating indicator lights should light up. The appliance is designed to
provide hot or cold water whenever you need it. It will automatically turn on and off
when the water reaches the desired temperatures.
Hot Water Faucet
Drip Tray
Drip Plug
Electric Power Cord
appliance
may have
Technical Information
Model
Voltage - Frequency
Heating power
Cooling power
Water Heating capacity
Water Cooling capacity
Prevention of electric shock
Circuit Illustration
Note: If technical data or the circuit graphic change, the information
sheet may not reflect those changes.
Attention
1.Make sure to have poured water from the hot water faucet before plugging and
switching the appliance ON to heat. If the dispenser is turned ON with an empty water
tank, it can be damaged.
2.When moving the water cooler, do not tilt more than 45º to avoid damage to the
compressor.
3.Always install the dispenser indoors, on a flat surface and at a distance no less than
15 cm from the back wall.
Never install it in the open air or under rain or direct
sunlight.
4.Keep this appliance away from high temperatures and in a dry and ventilated place.
5.Children should not use the red hot water tap.
6.If the appliance is not going to be used for a long period of time, unplug it and drain
all water in its interior.
7.Before the first use and after a long period of not using it, the water tank and water
pipes should be cleaned well. If possible, they should be disinfected and
and the first heated water must be discarded (switch the heating switch to OFF while
draining the system).
PWC235RQ
110V~60Hz
100W
0.17Cu.ft./h
0.07Cu.ft./h
sterilized
,

Publicidad

loading