Infiniton SBS-570WA Manual Del Usuario página 6

2) Allow some space around the refrigerator for ventilation and heat emission.
Allow at least 300mm of space from the top the refrigerator, 100mm of space from the
sides and 50mm of space from the back.
3) Locate your refrigerator in a moisture less place, to avoid rust and electricity leakage.
4) The gas injection must more than 1m³/8g
5) Place your refrigerator on a floor that is strong enough to support the refrigerator
when it is fully loaded and adjust the front feet to keep the refrigerator level. Unlevel standing
of the refrigerator will cause noise and oscillation. Please lay a firm plate below the refrigerator
when you put the refrigerator on the carpet, straw mattress and PVC materials in order to
avoid off-color carpet caused by the heat emission.
Make sure of good ventilation around the refrigerator.
★Installing your refrigerator
If the refrigerator couldn't through the room door smoothly, you can remove the refrigerator door at first.
(1)The freezer door
(a).Closing the freezer door and removing the top hinge A, then tearing down the wire gently
(b).Turing the screw of hinge B anticlockwise to remove hinge. Be careful don't let the door falling off.
(c).Lift the door vertical and remove the door from hinge C.
(2)Refrigerator door
You can remove the refrigerator door according to the way of freezer door.
During dismantling, please note to lift the door vertical to avoid the hinge damaged. Don't crush the wire
of door. Put the door at the right place to avoid scratch and damage.
(3)Reinstalling the door
You can reinstall the freezer and refrigerator door according to reverse order of removing the freezer
and refrigerator door.
★Operating your refrigerator
(1) static resting
To make sure of good working, let the refrigerator stand static at least one hour before plugging it into
the wall outlet.
(2) Cleaning the refrigerator
Clean the inside of the refrigerator with soft cloth.
5