Operation Of The Control Panel - Maxx Ice MIM360N Manual Del Usuario

OPERATION OF THE CONTROL PANEL:

1. When the unit is plugged in and the power switch is turned on, only the word "OFF" displays on the
LCD screen.
2. Press the ON/OFF button on the control panel. The LCD screen lights. If normal, only the words
"Water Fill" and "3 Min To End" displays on the LCD screen. The control board starts to time. When
the words "3 Min To End" change to "0 Min To End", the ice maker starts making ice automatically.
NOTE:
" Only when the double ice machine heads are stacked will the words "Stacking" be displayed on the
LCD screen.
" When the ice machine runs in "Water Fill" process, the control board will check the condenser
probe, evaporator probe and water curtain function, if one of them defaults, an exclamation mark
will appear and blink on the left bottom corner of the LCD screen. At this time press "ADJUST"
button. The Diagnostics for Curtain switch, condenser sensor and evaporator sensor will appear on
the LCD screen.
3. After three minutes, the ice maker will start to make ice automatically. The words "Making Ice"
displays on the LCD screen.
4. When the ice machine runs in harvest process, the words "Harvesting Ice" displays on the LCD
screen.
or