Blackstone 1845 Piezas Y Ensamblaje página 5

STEP 0 3
With four (4) M6X12 screws install the faceplate from the rear directly below
the adjustment knobs with the magnetic surface down. Then, install the back
panel with four (4) M6X12 screws. Be sure the hooks are on the left side.
STEP 0 4
Place the inside shelf onto the four built-in hooks.
STEP 0 5
Using one (1) large handle, two handle sleeves, two handle bezels, and two (2)
M6X16 screws assemble both cabinet doors as shown. Place the cabinet door
in place starting with the bottom post and then the top. Repeat this step with
the second cabinet door.
Rangetop Combo | Parts & Assembly
!
The manufacturer has made every
effort to eliminate any sharp
edges. However, you should
handle all components with care
to avoid accidental injury.
Some parts may contain sharp
edges, especially as noted
in these instructions. Wear
protective gloves if necessary.
!
The use of alcohol, prescription
or non-prescription drugs may
impair the consumer's ability
to properly assemble or safely
operate the appliance.
Two people are recommended for
the assembly of this product.
WA R N I N G
WA R N I N G
!
C A U T I O N
03