Publicidad
Idiomas disponibles
Idiomas disponibles
12
12B
12A
12 SOAP DISPENSER HEAD INSTALLATION
Pour in liquid soap (not included) into the Shank Orifi ce (12A). Insert Pump
Mechanism (12B) into soap dispenser body. Install Dispenser Head (12C) by
pushing fi rmly onto dispenser mechanism.
13
13C
13 SECURING FAUCET
From underneath sink, secure the faucet by placing the Metal Washer (13A)
and the Long Nut (13B) (
/
hex.) onto the Mounting Post (13C). Make sure that
7
16
the bumps on the Metal Washer (13A) are facing up. Tighten using a fl athead
screwdriver or an adjustable wrench until the faucet is fi rmly connected to the
sink. Do not over tighten!
12C
13C
13A
13B
13A
13B
ENGLISH
14
14C
14B
14A
14D
14 WATER SUPPLY CONNECTIONS
Thread the ½" NPSM Adapter (14A) into the
wrenches on both the Adapter and the Nut. Make connection to the Faucet Inlet
(14C). Repeat for the other tube. Connect water Supply Lines (14D) to Faucet
Inlets (14C). Please Follow the manufacturer's instructions when installing
Supply Lines. (Supply lines and fi ttings are not included).
15
15 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below
the sink.
FAUCET FUNCTIONS
16
CLOSED
16B
16 VALVE FUNCTION
By rotating the Lever Handle (16A) away from the Faucet Body (16B), the valve
will be activated allowing water to fl ow. The water fl ow will increase by continuing
to rotate the Lever Handle (16A). By rotating the Lever Handle towards you, the
water temperature will decrease to cold fl ow only. By rotating the Lever Handle
away from you, the water temperature will increased to hot fl ow only. The Spout
(16C) can be rotated around the Faucet Body (16B) in any direction.
4
14C
COLD
HOT
⅝
" Nut (14B). Tighten using
COLD
OPEN
16A
16A
16B
16C
14B
14A
14D
HOT
Publicidad
