Pegasus 67589-0004 Guía De Uso Y Mantenimiento página 7

Installation (continued)
6
Installing the mounting bracket
□ Apply thread sealant tape to the threads of the
supply pipe in a clockwise direction, as shown.
□ Screw the mounting bracket (C) onto pipe nipple
and insert the screw (D) through the mounting
bracket holes (1) and tighten until the mounting
bracket (C) is ush with the wall. Do not over
tighten.
C
D
1
7
Installing the faucet assembly
□
Rotate the faucet assembly (A) until correct
alignment is made (spout should be pointing
straight down).
□
Push the faucet body onto the quick connector
over the two o-ring. The splines inside the
faucet body should line up with the splines on
the quick connector.
□
Secure the faucet assembly (A) by tightening
the bottom set screw (E) with the Hex wrench.
A
E
7
Please contact 1-877-580-5682 for further assistance.
WWW.HOMEDEPOT.COM/PEGASUS