Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

ASSEMBLY INSTRUCTIONS
Model: #3597D
MoDRN Retro Glam Marni Metal Base Dining Chair
Lot Number: _________________
Date of Purchase: ___ / ___ / ____
WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be
!
distributed evenly. Exceeding load capacity may result in collapse and possible injury.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Thank you for your purchase. We want to make sure it is to your complete satisfaction. Hardware is separated individually for easy
identi cation. Please, identify and count all parts and hardware to make sure they match with the illustrations herein and are all
present.
If any parts are missing or defective please contact our customer service department.
Customer Service - 1-866-528-8364 / support@dimensionsfurniture.com
Your satisfaction is our top priority. Our products are designed and manufactured to meet the highest quality. In the event that
you have assembly questions, or parts are missing or damaged, please do not return the product.
Our customer service department would appreciate the opportunity to provide any help necessary regarding assembly and to
provide any necessary parts.
Manufactured by: Dimensions Furniture, Inc
341 Gradle Drive, Carmel, IN 46032
1-866-528-8364 / support@dimensionsfurniture.com
Maximum load
1/5

Publicidad

loading

Resumen de contenidos para MōDRN 3597D

  • Página 1 ASSEMBLY INSTRUCTIONS Manufactured by: Dimensions Furniture, Inc Model: #3597D 341 Gradle Drive, Carmel, IN 46032 1-866-528-8364 / support@dimensionsfurniture.com MoDRN Retro Glam Marni Metal Base Dining Chair Lot Number: _________________ Date of Purchase: ___ / ___ / ____ Maximum load WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be distributed evenly.
  • Página 2: Hardware List

    PRE-ASSEMBLY PREPARATION: CAUTION ! Please read below statements before beginning assembly.   Assembly should take place in a secure environment that is clean and dry.  Assembly can be done by one person, but two persons are recommended.  Allen wrench available for assembly.
  • Página 3 STEP-BY-STEP ASSEMBLY Step 1 - Set Stool Base on a at surface. Remove the two Bolts with Washers from the Back Cushion Bolt with Washer (1/4”x 1”) Allen Wrench...
  • Página 4 STEP-BY-STEP ASSEMBLY Step 2 - Flip the back cushion over and reattach to Stool Base in the upright position using the same two Bolts with Washers and tighten with the Allen wrench NOTE: Do not over tighten. Bolt with Washer (1/4”x 1”) Allen Wrench...
  • Página 5 STEP-BY-STEP ASSEMBLY Step 3 - Assembly is now complete. UPHOLSTERY CARE The fabric upholstery of your new item may arrive with creases or impressions typically caused by packaging materials. These temporary imperfections can easily be removed by brushing the a ected area in the natural direction of the bers, using a hand or soft bristle brush.
  • Página 6 Printed in China...
  • Página 7 INSTRUCIONES DE ENSAMBLAJE Manufactured by: Dimensions Furniture, Inc Modelo: #3597D 341 Gradle Drive, Carmel, IN 46032 1-866-528-8364 / support@dimensionsfurniture.com MoDRN Retro Glam Marni Metal Base Dining Chair Número de Lote: _________________ Fecha de Compra: ___ / ___ / ____ Carga Máximo ADVERTENCIA La capacidad de peso máximo como se menciona anteriormente no debe excederse.
  • Página 8: Lista De Herrajes

    PREPARACION DE PRE-ENSAMBLAJE: ¡ATENCIÓN! Por favor lea las instrucciones antes de comenzar el ensamblaje. Ensamblar en una super cie plana y pareja. El ensamble deve realizarse en un entorno seguro y seco. El ensamble lo puede hacer una sola persona pero se recomienda dos personas. La llave Allen esta disponible para el ensamble.
  • Página 9 ENSAMBLE PASO POR PASO Paso 1 - Coloque la Base de Silla sobre una super cie plana. Retire los dos Pernos con Arandelas del Cojín de Respaldo Perno con Arandela (1/4”x 1”) Llave Allen...
  • Página 10 ENSAMBLE PASO POR PASO Step 2 - Voltee el Cojín de Respaldo y vuelva a colocarlo en la Base de la silla en posición vertical usando los mismos dos Pernos con Arandelas y ajústelos con la Llave Allen NOTA: No ajuste excesivamente. Perno con Arandela (1/4”x 1”) Llave Allen...
  • Página 11 ENSAMBLE PASO POR PASO Paso 3 - El ensamblaje ya está completo. GARANTIA LIMITADA DE UN AÑO Garantía disponible solo para el comprador original. Se requiere comprobante de compra. Esta garantía es su única solución para defecto del producto y no cubre daños debido a mal manejo, mal uso o abuso. El fabricante no es responsable por daños fortuitos o generados.
  • Página 12 Impresso en China...