Subnet Mask - Longshine 1T1R Guía De Instalación Rápida

1. Connect the phone line from the wall socket to the
line-in port on the ADSL modem, or the coaxial cable
to the line-in port on the Cable modem.
2. Connect the ADSL or Cable modem to the Ethernet
WAN port on the back of the Wireless Router by using
the UTP cable.
3. Plug-in the power adapter to the modem and turn on
the power. Install the Ethernet card into the computer
by referring to the User Guide that came with the card.
4. Connect the computer to the Wireless Router by using
standard twisted-pair Ethernet cable from the
computer's Ethernet card to a 10/100Mbps Ethernet
port on the back of the Wireless Router.
5. Plug-in the power adapter to the Router and the other
side to the wall outlet.
Configuring the Wireless Router
1. In order to communicate with this Wireless Router, you
have to configure the IP address of your computer to
make it compatible with the device.The default network
setting of the device:
IP address: 192.168.100.1
255.255.255.0
2. You can use a browser to access the management
interface easily. Please open the Internet WEB
browser, and type 192.168.100.1 into the URL WEB

Subnet Mask:

3