Notes and instructions with the following symbols require particular attention:
Any non-observance of these instructions involves the danger of bodily harm to people and/or
damage to property.
Any non-observance of this instruction bears the risk of an electrical shock which may cause
damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
2. Range of use
Poolpumps from T.I.P. are highly efficient self-priming electric pumps for use with clean water, up to a maximum
temperature of 35 °C. These high-quality products with their conducing performance data were designed for the
pool water use.
The device is not suitable for installation in the public drinking water supply network.
Installation of the pump is only permitted if you have a pool or pond with the following standard: DIN VDE 0100
702/11.82. Please ask your electric utility company whether the respective requirements are fulfilled.
This product was developed for private use, i.e. non-for industrial applications or for continuous operation.
Do not use the pump in potentially explosive atmospheres or near flammable liquids or gases.
The pump is not suited to discharge saltwater, faeces, inflammable, etching, explosive or
other hazardous liquids. Please observe the max. and min. temperatures of the liquids to be
discharged stated in the technical data.
3. Technical Data
Model
Mains voltage / frequency
Nominal performance
Protection type
Suction port
Pressure port
1)
Max. flow rate (Q
)
max
Max. pressure
Max. delivery height (H
max
Max. suction height
Recommended max. suction height
Max. size of the solids being pumped 2 mm
Min. ambient temperature
Max. ambient temperature
Min. fluid temperature
Max. fluid temperature (T
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
Guaranteed sound power level (L
Dimensions (L x D x H)
Item no.
1)
The values were determined with free, unreduced in- an outlet.
2)
Noise emission values obtained according to the EN 12639 regulation. Measurement method according to EN ISO 3744.
SPP 300 F
220-240 V~ / 50 Hz
300 Watt
IPX5
45.48 mm (1½") female 45.48 mm (1½") female 45.48 mm (1½") female
45.48 mm (1½") female 45.48 mm (1½") female 45.48 mm (1½") female
8,000 l/h
0.85 bar
1)
)
8,5 m
8 m
4 m
5 °C
40 °C
2 °C
)
35 °C
max
40, evenly distributed
1.5 m
H05RN-F
4.5 kg
2)
)
71 dB
WA
42 x 18 x 21.5 cm
30442
SPP 400 FT
220-240 V~ / 50 Hz
400 Watt
IPX5
10,000 l/h
0.9 bar
9 m
8 m
4 m
2 mm
5 °C
40 °C
2 °C
35 °C
40, evenly distributed
1.5 m
H05RN-F
5.4 kg
71 dB
42 x 18 x 21.5 cm
30443
2
SPP 600 FT
220-240 V~ / 50 Hz
600 Watt
IPX5
13,000 l/h
1.2 bar
12 m
8 m
4 m
2 mm
5 °C
40 °C
2 °C
35 °C
40, evenly distributed
1.5 m
H05RN-F
5.8 kg
71 dB
42 x 18 x 21.5 cm
30444
9