Carrying Handle
CAUTION: Do Not attempt to carry wet/dry vac by lid or detachable blower handle. Only use carrying handles
molded onto tank.
Automatic Suction Shut-Off
NOTE: The unit must be used in upright position at all times, otherwise the ball float will automatically shut-off the
suction.
The automatic suction shut-off functions when tank is full of liquid. As the tank fills, the ball float (inside cage) rises
until it seats itself against bottom of motor. This shuts off the suction causing the motor sound to become higher in
pitch. When this happens, empty tank.
The automatic suction shut-off also functions if the cleaner tips over. To continue use, turn cleaner off and set it
upright. Wait a few seconds to allow motor to come to a complete stop so ball drops; restart the motor.
How To Empty Wet or Dry Contents From Tank
NOTE: Turn off power switch and unplug electrical cord before emptying tank.
1. Raise hose above tank to drain excess liquid into
tank.
(For wet pick-up only.)
2. Remove hose.
3. Remove lid.
Detachable Blower
NOTE: Always wear safety goggles (not provided). Never point blower toward people, animals, or objects that may be
injured/damaged by flying debris. These units must NOT be used to power a paint sprayer or to supply air to
any other sprayer.
1. Release detachable blower latches by turning.
2. Lift detachable blower.
3. Pull off air diffuser.
4. Push and twist large diameter wand over blower
outlet.
5. Attach blower nozzle.
6. Hold detachable blower by large carrying handle.
7. Grasp auxiliary handle for better control,
if needed.
8. The detachable blower can be replaced
and latched onto the tank in any position. For
user safety, the blower outlet should aim away
from user.
9. Replace air diffuser.
4. Empty contents into suitable drain for liquids or container
for dry contents.
5. Replace lid and hose and continue cleaning.
2
3
4
5
1
7
6
9