Installing Batteries - Insignia NS-C2113 Guia Del Usuario

6 To stop playback, press the STOP button.
7 To repeat only the current track, press the REPEAT button once.
8 To repeat all tracks on the CD, press the REPEAT button twice.
To program CD playback:
1 Press STOP to stop CD playback.
2 Press PROGRAM, press NEXT until the track you want appears on the
LCD, then press PROGRAM again. The track is added to the playback
program.
3 Repeat Step 2 for each track you want to program. You can program up
to 32 tracks.
4 Press PLAY/PAUSE/CD to start playback of the tracks in the order that
you programmed them.
5 To clear the programmed tracks from memory, press STOP.
Attaching headphones
To attach headphones:
• Insert your headphone plug (headphones not included) into the
headphone jack. The speakers automatically turn off while headphones
are connected.

Installing batteries

To install batteries:
1 Loosen the screw on the battery compartment door, then swing the door
open.
2 Insert four C batteries (not included). Make sure that they're oriented
according to the diagram inside the battery compartment.
3 Close the battery compartment door, then tighten the screw.
Connecting external power
To connect external power:
1 Make sure you are not in a wet or moist environment.
2 Connect the power adapter's DC power plug into the shower radio's
DC power jack. (power adapter not included)
3 Plug the power adapter's AC power plug into an AC power outlet.
Maintaining the radio and CDs
• Keep your CDs clean. Any dirt can scratch the CD surface, making
playback less clear. Dirt on a CD can also damage the CD player
mechanism. Wipe away any fingerprints or dust on the playing surface of
a disc using a soft cloth.
• When you hold CDs, make sure you do not touch the playing surface.
• Do not place CDs near a heater or source of heat.
• If you do not use the shower radio for a long time, disconnect external
power and remove the batteries.
4
Insignia NS-C2113 Shower Radio
www.Insignia-Products.com