Philips AJ 3935 Manual Del Usuario página 9

– The alarm mode displays are shown briefly in sequence:
- alarm volume low, 'Lo:' number (0-32);
- alarm volume high, '
- Buzzer melody alarm 'AL' number (1-4) and
- Radio alarm indicator
- 'Cd' alarm track number (0-99) and
- clock time: alarm off position (alarm indicators disappear)
6. If you have selected the CD or buzzer melody alarm, please
read the respective chapter on further options:
• CD alarm mode: Selecting a CD track
• Buzzer melody alarm mode: Selecting a melody
CD alarm mode: Selecting a CD track
You can programme and select a CD track number between 1-99,
when the set is in standby or radio mode.
However, if the track number programmed does not exist on your
CD, the first track of the CD will be played during the alarm call.
1. In the standby or radio mode, insert a CD into the CD
compartment.
2. Press ALARM 1 or 2 MODE•OFF briefly once or more until the
Cd track number display is shown.
3. As soon as the Cd display appears, press UP7 or DOWN8
until the desired track number is shown.
– The display shortly returns to standby clock time.
4. To review your programmed track number, press ALARM 1 or 2
MODE•OFF again repeatedly until the CD display is shown.
Note:
The buzzer melody alarm option will automatically replace the CD
alarm if you have:
– inserted a CD incorrectly;
– inserted a damaged CD;
– forgotten to insert any CD.
Buzzer melody alarm mode: Selecting a melody
There are 4 buzzer melodies to choose from.
1. In the standby or radio mode, press ALARM 1 or 2 MODE•OFF
once or more until the display shows the buzzer melody 'AL:',
number (1-4) and
2. As soon as buzzer display appears, press UP7 or DOWN8
until the desired buzzer 'AL' number (1-4) is shown.
– As UP7 or DOWN8 is pressed, you will also be able to
hear a short preview of the buzzer melody.
– The display shortly returns to standby clock time.
' number (0-32);
;
indicator.
indicator.
SETTING THE ALARM
indicator;
9