Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 11
STEP 11
1. Attach both doors (14), (15) to bottom shelf (8) by inserting pins into holes on bottom shelf (8).
2. Slide upper back panel (16) into grooves on top left side panel (3), top right side panel (4) and top
board (1).
3. Slide large back panel (13) into grooves on lower left side panel (3) and lower right side panel (4).
4. Attach top board (1) to top left side panel (3) and top right side panel (4) by inserting cam bolts
into cam lock holes and inserting wood dowel into dowel holes on top left side panel (3) and top
right side panel (4), and insert pin into pin hole on top board (1).
5. Insert 4 cam locks (B) into cam lock holes on top left side panel (3) and top right side panel (4)
separately and rotate clockwise to secure cam bolts.
STEP 12
STEP 12
1.Attach bottom left side panel (5) to rear bottom cross bar (9), rear top cross bar (17) and front top
cross bar (11) by inserting wood dowels into dowel holes on rear bottom cross bar (9), rear top
cross bar (17) and front top cross bar (11).
2. Insert 3 screws (Q) through holes on bottom left side panel (5) and tighten to rear bottom cross
bar (9), rear top cross bar (17) and front top cross bar (11) using allen wrench (R).
3. Repeat above steps to attach bottom right side panel (6) to rear bottom cross bar (9), rear top
cross bar (17) and front top cross bar (11).
4. Insert 2 wood dowels (C) into dowel holes on rear top cross bar (17) and front top cross bar (11).
Publicidad
