Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-8161S
Lexus SC430 2002-2010
KIT FEATURES
• ISO DIN radio provision with pocket (without factory door)
• DDIN radio provision (without factory door)
• DDIN radio provision (with factory door)
• Painted silver
KIT COMPONENTS
• A) Radio trim panel for use with factory door • B) Radio trim panel for use without factory door • C) Brackets
• D) Pocket • E) (8) #8 x 3/8" Phillips pan-head screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • TYTO-01 Toyota Amplified Interface
Antenna Adapter: • Not required
METRA. The World's best kits.
APPLICATIONS
99-8161S
C
1-800-221-0932
™
Dash Disassembly
– Lexus SC430 2002-2010 ..................................... 2
Kit Assembly
– ISO DIN radio provision with pocket
– DDIN radio provision (without factory door)........... 4
– DDIN radio provision (with factory door) ............5-7
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
D
E
• Socket wrench
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
Table of Contents
(without factory door) ........................................... 3
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-8161S
Resumen de contenidos para Metra 99-8161S
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-8161S APPLICATIONS Table of Contents Lexus SC430 2002-2010 99-8161S Dash Disassembly – Lexus SC430 2002-2010 ........2 Kit Assembly KIT FEATURES – ISO DIN radio provision with pocket • ISO DIN radio provision with pocket (without factory door) (without factory door) ...........
-
Página 2: Dash Disassembly
99-8161S Dash Disassembly 1. Open the center console lid and 3. Unclip and remove the climate then unclip and remove the heated controls. (Figure C) seat switch panel in front of the 4. Remove (4) 10 mm bolts securing center console. (Figure A) the radio. -
Página 3: Kit Assembly
(Figure C) 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5. Mount the new radio assembly into the dash and reassemble the dash... - Página 4 (Figure B) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 4. Mount the new radio assembly into the dash and reassemble the dash in reverse order of disassembly.
- Página 5 99-8161S Kit Assembly (with factory door) DDIN radio provision 1. Remove (4) Phillips screws per side of factory bracket/door assembly and slide factory radio out of the assembly. (Figure A) 2. Remove (2) Phillips screws per side to remove the bottom bracket from the factory radio.
- Página 6 99-8161S Kit Assembly (with factory door) 3. Attach the bottom bracket to the aftermarket radio. (Figure C) 4. Position the aftermarket radio into the factory bracket/door assembly. (Figure D) Continued on next page (Figure C) (Figure D)
- Página 7 6. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 7. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly.
- Página 8 INSTALLATION INSTRUCTIONS FOR PART 99-8161S NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
-
Página 9: Características Del Kit
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8161S Indice Lexus SC430 2002-2010 99-8161S Desmontaje del tablero – Lexus SC430 200-2010 ........2 Ensamble del kit CaraCterístiCas del kit – Provisión de radio ISO DIN con cavidad • Provisión de radio ISO DIN con cavidad (sin puerta de fábrica) (sin puerta de fábrica) .......... -
Página 10: Desmontaje Del Tablero
99-8161S Desmontaje del tablero 1. Abra la tapa de la consola central 3. Desenganche y quite los controles y luego desenganche y quite el del clima. (Figura C) panel de interruptores del asiento 4. Quite los (4) pernos de 10 mm que calefactado al frente de la consola sostienen el radio. -
Página 11: Ensamble Del Kit
4. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 5. Monte el conjunto del radio en el tablero y vuelva a armar el tablero... - Página 12 3. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 4. Monte el conjunto del radio en el (Figura A)
- Página 13 99-8161S Ensamble del kit (con puerta de fábrica) Provisión de radio DDIN 1. Quite los (4) tornillos Phillips por lado del ensamble del soporte de fábrica/puerta y deslice el radio de fábrica para sacarlo del ensamble. (Figura A) 2. Quite los (2) tornillos Phillips por lado para quitar el soporte inferior del radio de fábrica.
- Página 14 99-8161S Ensamble del kit (con puerta de fábrica) 3. Una el soporte inferior al radio de mercado secundario. (Figura C) 4. Posicione el radio de mercado secundario en el ensamble del soporte de fábrica/la puerta. (Figura D) Continúa en la página siguiente...
- Página 15 6. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 7. Monte el conjunto del radio en el tablero y vuelva a armar el tablero al revés de como lo desarmó.
- Página 16 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8161S EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.