Philips NORELCO BG7030 Manual Del Usario página 4

Battery status indications
- When the battery is almost empty, the
battery status indicator flashes orange
(Fig. 4).
- When the product is charging, the battery
status indicator flashes white (Fig. 5).
- When the battery is fully charged, the
battery status indicator lights up white
continuously.
Note: After approx. 30 minutes, the battery
status indicator goes out automatically.
Operating time
When the product is fully charged it has a
cordless operating time of up to 80
minutes.
Using the product
You can use the product wet or dry to shave
or trim hair on all parts of the body below
the neckline.
Always check the product and all
accessories before you use it. Do not use
the product or any accessory if it is
damaged, as this may cause injury. Always
replace a damaged part with one of the
original type.
- Use this product for its intended
household use as described in this manual.
- For hygienic reasons, the product should
only be used by one person.
- Trimming is easier when the skin and hair
are dry
Note: This product is waterproof (Fig. 2). It is
suitable for use in the bath or shower and
for cleaning under the tap. For safety
reasons, this product can therefore only be
used without cord (Fig. 6).
Trimming
Trimming tips
Do not use the trimmer head on sensitive
areas without the guard attachment.
- If you are trimming for the first time, be
careful. Do not move the product too
fast. Make smooth and gentle
movements.
- When you trim for the first time, use
trimming setting 7 (9/32 in./7mm) to
familiarize yourself with the product.
- Since all hairs do not grow in the same
direction, you may want to try different
trimming directions(i.e. upwards,
downwards, or across). Practice is best
for optimum results.
- Always make smooth and gentle
movements and be sure the surface of
the guard always stays in contact with
your skin.
- For body trimming, make sure hair is
clean and dry as wet hair tends to stick
to the body and when trimming sensitive
areas, always use the trimming comb
attachment.
Trimming
1 Press the length selector (1) and then
slide it up or down to select the desired
hair length setting (2) (Fig. 7).
2 Press the trimmer head on/off button to
turn on the product (Fig. 8).
3 Trim against the direction of hair growth
for optimal performance (Fig. 9).
Note: Make sure that the flat part of the
trimming guard is always fully in contact
with the skin.
4 Turn off and clean the product after each
use.
Shaving
Do not use the shaver head to shave or
trim hair on face or head.
- When shaving sensitive areas for the first
time, you may feel some discomfort,
irritation or reddening of the skin. This is
normal as your skin needs time to adjust
to shaving.
- If your hair is longer than 13/32in. (10
mm), trim hair to a length of 1/8in. (3mm)
first for optimum shaving results.
- For dry use, be certain that your skin is
clean and dry before using the shaver
head.