Descargar Imprimir esta página

Publicidad

Enlaces rápidos

TRANSFER v2 ADD-ON
TM
ONE BIKE
ASSEMBLY

Publicidad

loading

Resumen de contenidos para Kuat TRANSFER v2 ADD-ON

  • Página 1 TRANSFER v2 ADD-ON ONE BIKE ASSEMBLY...
  • Página 2 Parts (2) M6 x 60 Flathead (1) Front Tire Cradle (1) Tire Hook (2) M6 Nut (1) Locator Bolt (2) Spacer (2) M8 x 350 (2) M8 x 255 (1) Driver-Side Assembly (1) Passenger-Side Assembly Tools 2.5mm Allen Key 4mm Allen Key Combo Hex Wrench...
  • Página 3: Important

    IMPORTANT When loading a bicycle, ensure tire hook is placed as close to the bicycle fork as possible. Placing the tire hook further away increases the risk of bicycle becoming unsecured in the rack, which may result in falling and damage.
  • Página 4 Driver-Side Assembly Slide Front Tire Cradle into position. Install Locator Bolt in Position A as shown.
  • Página 5 Tire Hook Arm Assembly Push button on handle and slide Tire Hook up the Tire Hook Arm from the bottom. Insert arm into Arm Knuckle. Install (2) M6 x 60 Flathead bolts and (2) M6 nuts.
  • Página 6 Endcap Removal Remove (2) M4 x 12 Flathead bolts from driver-side and passenger-side Endcaps. Remove Endcaps and set aside.
  • Página 7 Driver-Side Assembly Installation Attach Driver-Side Assembly to your rack using (2) M8 x 350 bolts and Spacer. Alternate tightening each bolt to ensure a secure, even fit.
  • Página 8 Passenger-Side Assembly Installation Attach Passenger-Side Assembly to your rack using (2) M8 x 255 bolts and Spacer. Alternate tightening each bolt to ensure a secure, even fit.
  • Página 9 Reinstall Tray Endcaps Reinstall Endcaps using the original (2) M4 x 12 Flathead bolts. Locking Side Endcap on the Passenger-Side, upside down. Non-Locking Side Endcap now installs to the Driver-Side.
  • Página 10: Avertissements

    • Do not take through automatic car wash. • Drive responsibly. If you have questions or problems, please contact Küat Racks directly by calling toll free 1(877)822-KUAT, or by email: info@kuatracks.com ADVERTENCIAS • Siga las instrucciones para un montaje, instalación y uso adecuados.
  • Página 11 Küat Racks Limited Lifetime Warranty Küat honors the warranty on all Küat brand products for original owners of the product. Warranty is not transferable. If a Küat rack that is covered by the terms of this warranty and is determined by Küat, to be defective, Küat will repair or replace the defective parts.
  • Página 12 1.877.822.5828 info@kuatracks.com kuatracks.com kuatracks.com...

Este manual también es adecuado para:

Transfer v2