Technical Data - RS Pro RS-125 Manual De Instrucciones

3
Moisture meter for wood and building material
Used to measure the moisture level in sawn timber (also cardboard, paper) and hardened
materials (plaster, concrete and mortar). It displays the moisture level in the material
straightaway.

Technical data

Measuring principle Electrical resistance
Electrode length 8 mm
Electrodes Integrated, replaceable
Measuring range Wood: 6 – 44 %
Material 0.2 – 2.0 %
Display Wood: ±1 %
Accuracy Material: ±0.05 %
Auto power OFF After approx. 15 minutes
Battery 3 × Cr 2032, replaceable
Housing material Impact-proof plastic housing
Ambient temperature 0 - 40°C
Ambient Relative humidity 0 – 85 %RH
Dimensions 139×47×25 mm
Weight approximately 100g
Warranty 1 year
Maintenance
• Always keep instrument dry.
• Prevent dirt from getting in between the measuring electrodes
• Changing the electrodes:
Remove the 5 screws at the back of the instrument.
Remove housing lid. Remove all 5 screws on the electronic plate. Replace electrodes.
Close instrument again.
30/11/2017 Version No. 001
Moisture Meter/ English
1