Product Features; Inserting/Replacing The Battery - Bosch Professional DLE 70 Manual Original

OBJ_BUCH-703-002.book Page 20 Wednesday, July 23, 2008 3:15 PM
20 | English

Product Features

The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Reference level button
2 Memory retrieve button "M="
3 Memory add button "M+"
4 Button for minimum and maximum
measurement
5 Button for length, area and volume
measurement
6 Spirit level
7 Display
8 Alignment aid
9 Laser warning label
10 Button for measuring and continuous
measuring
11 Button for indirect length measurement and
measurement of wall surfaces
12 Memory subtraction button "M – "
13 Button for continuous laser beam
14 On/Off and memory delete button
15 Positioning pin
16 Latch of the positioning pin
17 1/4" thread
18 Latch of battery lid
19 Battery lid
20 Serial number
21 Laser beam outlet
22 Reception lens
23 Tripod*
24 Laser viewing glasses*
25 Laser target plate*
26 Carrying strap
27 Protective case
*The accessories illustrated or described are not
included as standard delivery.
1 609 929 R53 | (23.7.08)
Display Elements
a Measured values stored
b Battery indication
c Temperature indicator
d Measured value/result
e Unit of measure
f Measurement reference level
g Laser switched on
h Individual measured value (for length
measurement: result)
i Measuring functions
Length measurement
Area/surface measurement
Volume measurement
Indirect length measurement
Wall surface measurement
Continuous measurement
MIN Minimum measurement
MAX Maximum measurement
Assembly

Inserting/Replacing the Battery

Use only alkali-manganese or rechargeable
batteries.
Fewer measurements are possible when using
1.2 V rechargeable batteries as compared with
1.5 V batteries.
To open the battery lid 19, press the latch 18 in
the direction of the arrow and remove the bat-
tery lid. Insert the batteries provided. Pay atten-
tion to the correct polarity of the batteries
according to the representation in the battery
compartment.
When the battery symbol appears in the dis-
play for the first time, then at least 100 measure-
ments are still possible. The batteries must be
replaced when the battery symbol flashes;
taking measurements is no longer possible.
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the bat-
teries can corrode and discharge themselves.
Bosch Power Tools