Additional Specific Safety Rules; Safety Instructions For All Saws - BTI Proline A-KS 18V Instrucciones De Manejo

f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc., in accordance with these instructions
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specifi ed by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fi re
when used with another battery pack.
b) Use power tools only with specifi cally
designated battery packs. Use of any other
battery packs may create a risk of injury and fi re.
All manuals and user guides at all-guides.com
c) When battery pack is not in use, keep it away
d) Under abusive conditions, liquid may be
6) SERVICE
a) Have your power tool serviced by a qualifi ed

ADDITIONAL SPECIFIC SAFETY RULES

Safety instructions for all saws

a) DANGER: Keep hands away from cutting
b) Do not reach underneath the work piece. The
c) Adjust the cutting depth to the thickness of
d) Never hold piece being cut in your hands or
e) Hold power tool by insulated gripping surfaces
f)
g) Always use blades with correct size and shape
h) Never use damaged or incorrect blade washers
47
from other metal objects like paper clips, coins,
keys, nails, screws or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fi re.
ejected from the battery, avoid contact. If
contact accidentally occurs, fl ush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
area and the blade. Keep your second hand
on auxiliary handle, or motor housing. If both
hands are holding the saw, they cannot be cut by
the blade.
guard cannot protect you from the blade below the
work piece.
the work piece. Less than a full tooth of the blade
teeth should be visible below the work piece.
across your leg. Secure the work piece to
a stable platform. It is important to support the
work properly to minimize body exposure, blade
binding, or loss of control.
when performing an operation where the cutting
tool may contact hidden wiring. Contact with
a "live" wire will also make exposed metal parts of
the power tool "live" and shock the operator.
When ripping always use a rip fence or straight
edge guide. This improves the accuracy of cut and
reduces the chance of blade binding.
(diamond versus round) of arbour holes. Blades
that do not match the mounting hardware of the
saw will run eccentrically, causing loss of control.
or bolt. The blade washers and bolt were specially
designed for your saw, for optimum performance
and safety of operation.
E N G L I S H