Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction
Your new juicer has a special, slightly tilted design that leans 5° to the
side of the juice outflow opening to ensure maximum juice output.
General description(Fig.1)
Parts: 1
A.
Pusher
B.
Feeding tuble
C.
Lid
D.
Filter
E.
Juicer collector
F.
Pulp container
G.
Control knob
H.
Driving shaft
I.
Motor unit
J.
Safety clamp
K.
Juice jug lid
L.
Juice jug
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
1. Check if the voltage indicated on the base of the appliance corresponds
to the local mains voltage before you connect the appliance.
2. Do not use the appliance when the mains cord , the plug or other
components are demaged.
3. If the mains cord is demaged, it must be replaced by a service centre
authorised by or similarly qualified persons in order to avoid a hazard.
4.This appliance is intended for household use only.
5. Keep the appliance out of the reach of children.
6. Never let the appliance operate unattended.
7. Make sure all parts are correctly mounted before you switch on the
appliance.
8. Only use the appliance when safety clamps are locked.
9. Do not operate the juicer for more than 40 seconds at a time when
juicing heavy loads and let it cool down sufficiently afterwards.
10. Never reach into the feeding tube with your fingers or an object while
the appliance is running.Only the pusher is to be used for this purpose.
11. Only unlock the clamps after you have switched the appliance off and
the filter has stopped rotating.
12. Do not remove the pulp container when the appliance is in operation.
13. Do not touch the small cutting blades in the base of the filter.
Publicidad
Tabla de contenido
