Retrieving Codes - Jasco RM94906 Manual Del Usuario

94906 Revised Size 1/21/02

Retrieving Codes

If you need to find the three-digit code for your
TV, VCR, DVD Player, DBS Receiver, or Cable
Box after your device is set-up using Code
Search, use this procedure.
1. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
2. Press and release the
device button for the
d e v i c e's code you are
retrieving . The
I N D I C ATOR LIGHT
will blink once then
remain lit. For
DVD•AUX, press
DVD•AUX then
the device button for
the code you are
retrieving.
3. Press and release
SETUP . The
INDICATOR LIGHT
will turn off.
4. Starting with 0 on the
keypad, press the
number buttons in
order (0-9) until the
INDICATOR LIGHT
blinks.
5. The number which
causes the INDICATOR
LIGHT to blink is the
first digit of your code.
6. Repeat step 4 until you
have retrieved all three
numbers in the code.
2/25/02 4:20 PM
INDICATOR
SETUP
LIGHT
DVD•AUX CBL•SAT
BLINK
OFF
SETUP
. . . . .
9
Page 10