7.
Using the device for the fi rst time
7.1.
Setting up the device
Unpack all the product parts.
Remove all packaging materials.
Check that all the parts have been supplied.
Keep the packaging material out of the reach of children.
Place the product on a sturdy, level surface.
7.2.
Inserting the backup battery
You can insert a 3V battery (type CR 2032; not supplied with the product) so that the time,
alarm time and radio stations will be saved if you disconnect the product from the mains.
Pull out the plug.
Place the product carefully upside down on a soft surface.
Make sure that the product cannot move in this position.
Hold the product fi rmly with one hand.
Using a cross-tip screwdriver, undo the screw on the battery compartment cover.
ES
DE
EN
121