Storing Service Call Number; Flash Length Setup (R Key) - Door Entry Direct XT/200 Instrucciones

Storing service call number

This programming option may prove useful
for calling a telephone number used fre-
quently, for example, or to avoid dialling
repetitive numbers, such as the area code
or the code of another fixed telephone
network.
Lift the receiver
or
press the hands-free key.
Press the PROGRAMMING
key.
Press the SERVICE key.
3
2
Key in the desired number
1 6
5
4
9
8
(max. 20 digits) (
7
0
Press the SERVICE key to
save.
Press the PROGRAMMING
key.
Replace the receiver
or
press the hands-free key.
( 1 ) If the telephone is connected to a switch-
board, a pause must be inserted between
the 0 (number dialled to get an outside line)
and the following number.
To insert a pause, press the RP key e.g. 0
RP 0123 456789.
The length of the pause can be doubled by
pressing the RP key twice.
PROGRAMMING

Flash length setup (R key)

R
1
R
1 ).
24
Lift the receiver
or
press the hands-free key.
Press the PROGRAMMING
key.
Press the R key.
Press the number relating to
4
÷
the length to be set (in the
range 1 to 4) (see section
entitled TECHNICAL FEATU-
RES).
Press R to save.
Press the PROGRAMMING
key.
Replace the receiver
or
press the hands-free key.