Remote Control Functions - Logic3 WIS030 Manual Del Usuario

setting the sleep Mode
The sleep time can be adjusted to the user's preference.
1. in any source mode Press and hold the 'sleep' button on the i-station sound Bar/Remote Control.
or
2. sleep time will be displayed on the screen, Preset on 'OFF'
3. Using the 'Tuning' buttons set the duration of the sleep mode (OFF, 15, 30, 45, 60)
4. Once you have selected your sleep time, a slEEP
5. The display will automatically return to the current time display after 10 seconds.
6. The sleep time will be counted down, to show the remaining sleep time press and hold the 'sleep'button.
or
set up of Video connection
1. Remove the Audio/Video connection cover from the bottom left hand corner of the soundBar.
2. Connect the i-station sound Bar to your TV via either the Composite Cable (included) or a Component Cable (not included)
3. Ensure that you switch the Video Out on the back of the unit to the correct Video Output (Component/Composite).
COnnECTing C/V
(COMPOsiTE ViDEO)
ViDEO Y/g
AV in COMPOnEnT in
icon will be displayed on the bottom right of the display.
COnnECTing TO Y/Pr/Pb
(COMPOnEnT ViDEO)
Pb/B Pr/R
NOTE: It is important that after connecting
your i-Station Sound Bar to your TV, the TV
Output switch on the rear of the i-Station
Sound Bar is set correctly corresponding to
your Video connection.
8
to adjust the lcD / Mood light dimmer level
The i-station sound Bar works in conjunction with the downloaded App (logic3 i-station soundBar Wis030), which can
be downloaded via iTunes.
This application will allow you to set your lCD/Mood light dimmer levels on the speaker via the iPhone.
There are two ways to set your lCD/Mood light dimmer levels:-
1. Using the i-station sound Bar
A. Press the 'Dimmer' button on the i-station sound Bar / Remote Control, there are 3 levels of dimming. (High, Medi-
mum, low, lCD Off, Mood light Off)
2. Using the Wis30 soundBar App.
1 2

remote control Functions

1. insert the battery into the back of the Remote Control.
WARNING: Please ensure that the batteries are inserted correctly. If the batteries are inserted incorrectly
(reversed polarity), this may cause personal injury as well as damage to your remote control i-Station
stand By scroll Down
source Play/Pause
Menu Mute/sleep
Repeat Dimmer
RW/Previous select
Volume Down shuffle
scroll Up FF/next
EQ Volume Up
Mood light (At each
end of the i-station)
9