Okilan 6130 Network Card Installation - Oki OkiLAN 6130 Manual De Instalación

OkiLAN 6130 Network Card Installation

The OkiLAN 6130 Print Server enables Ethernet network users to connect to a network-configured
printer. It supports 10/100-megabit networks, TCP/IP Direct Printing and Server-Based Printing.
Note: Before using the parallel port, you must remove the OkiLAN 6130 from the printer —see
Note
: The OkiLan 6130 can only be used be used without a parallel cable being
your on-line OkiLAN User's Guide for instructions on how to do this.
connected.
Installing the OkiLAN 6130 Network Card
1. Turn off printer power.
2. Unplug the power cord.
3. Detach the interface cable from the rear of the printer.
4. Pry off the breakaway panel next to the interface connector with a screwdriver
Note: Your printer may look like
OR
Breakaway panel
OR
3
either example below.