Tabla De Contenido; Warning; Characteristics - Noark Electric Ex9DTS 1CO Manual Del Usuario

Content
Warning ...................................................................................................
Characteristics .......................................................................................
Description .............................................................................................
Technical parameters .........................................................................
Versions of time switches, Load .....................................................
Symbol, Connection ............................................................................
Menu overview .....................................................................................
Control description, Reset ...............................................................
Mode precendence, Language settings .......................................
Time and date setting .......................................................................
Time program ........................................................................................
Setting the switching modes .........................................................
Setting options .....................................................................................
Example of programming ................................................................
2

Warning

2 Device is constructed for connection in 1-phase main alternating current
voltage and must be installed according to norms valid in the state of
3
application. Connection according to the details in this direction. Instal-
lation, connection, setting and servicing should be installed by qualifi ed
4
electrician staff only, who has learnt these instruction and functions of
6
the device. This device contains protection against overvoltage peaks and
disturbancies in supply. For correct function of the protection of this de-
7
vice there must be suitable protections of higher degree (A, B, C) installed
8
in front of them. According to standards elimination of disturbancies must
be ensured. Before installation the main switch must be in position "OFF"
9
and the device should be de-energized. Don´t install the device to sources
10
of excessive electro-magnetic interference. By correct installation ensure
ideal air circulation so in case of permanent operation and higher ambi-
11
ent temperature the maximal operating temperature of the device is not
exceeded. For installation and setting use screw-driver cca 2 mm. The de-
12
vice is fully-electronic - installation should be carried out according to this
14
fact. Non-problematic function depends also on the way of transporta-
tion, storing and handling. In case of any signs of destruction, deforma-
18
tion, non-function or missing part, don´t install and claim at your seller
20
it is possible to dismount the device after its lifetime, recycle, or store in
protective dump.
21

Characteristics

- Serves for controlling of various types of appliances
in dependance on real time (automation-switching
of heating, pumps, ventilation etc.). Appliances can
be operated in concrete periodic time cycles or ac-
cording a pre-set program (depends on type, see the
chart Versions of time switches).
- Ex9DTS 1CO 230V, Ex9DTSC 1CO 230V: 1-channel version.
- Ex9DTS 2CO 230V, Ex9DTSC 2CO 230V: 2-channel ver-
sion (to each channel can be assigned an individual
program).
- Possibility to control two independent circuits.
- Switching modes:
- Auto - automatic switching mode:
- Programme
- switching based on a programme
(astro or time).
- Random
- switches randomly in a 10 - 120 minute
interval.
- Holiday  - holiday mode - option of setting up a
period for which the timer will be blocked, i.e. will
not switch based on the set programmes.
- Manual
- manual mode - option of controlling the
individual output relays manually
- impulsE-cyCLE - switches according to the set pulse /
pause duration
- Memory capacity for 100 time programmes (common
for both channels).
- Programming can be performed both when power is
on or in backup mode.
- Output relays only operate with a supply voltage of
AC 230 V.
- Menu display selection - CZ / SK / EN / ES / PL / HU / RU
(default factory setting EN).
- Selection of automatic switching between summer /
winter timebased on location.
- Backlit LCD display.
- Simple and easy setup using 4 control buttons.
- Sealable transparent cover on the front panel.
- The timer has a backup battery that preserves data in
case of a power supply failure (reserve backup time
up to 3 years).
- Supply voltage: AC 230 V.
- 2-module, mounted onto a DIN rail, clamping terminals.
EN
3