Replacing The Lamp - Fagor CFT-90BEPOCA Montaje Y Modo De Empleo

Mounting and replacing the carbon filter:
a) Disconnect the hood from the electricity.
b) Remove the metal grease filters (Fig. 1).
c) If the filters have not been installed, place one
filter on each side so that they cover the
grates protecting the rotor on the motor. Then
turn the center handle for the filters in the
clockwise direction (Fig. 2).
d) If the charcoal filters have already been
installed (covering the grates protecting the
rotor on the motor) and must be replaced, turn
the central handle in the counter-clockwise
direction until the filters are unlocked.
e) Refit the the metal grease filters.
Cleaning
To clean the outside of the hood use a cloth
moistened with denatured alcohol or neutral
liquid detergents. Never use products containing
abrasive.
Wipe brushed stainless steel in the same direction
as the brushing to avoid scratching.
Clean the external surface of the cooker hood
almost once every 10 days.
Attention
Failure to observe the rules for cleaning the
appliance and changing and cleaning the filters
may cause fires.
Therefore, we recommend observing these
instructions.

Replacing the lamp

a) Disconnect the hood from the electricity.
b) Unscrew the light shield (Fig. 3).
c) Replace the damaged lamp with a new halogen
lamp of 20Watt max.
d) Refit the the metal grease filters and the light
shield.
e) Before calling for repair service because the
hood fails to light up, make sure the bulbs are
screwed in tightly.
GB
15