Habitat Renee Manual De Instrucciones página 2

EN
This manual contains important information that should be kept for
future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Mod. A:
Cover: 100% polyester.
Mod. B:
Cover: 92% polyester, 8% polyamide.
Top layer of seats and armrests : polyester fibers.
Padding of seats: polyurethane foam 25 kg/m
Padding of backrests: 70% polyester fibres and 30% polyester foam.
Padding of armrests: polyurethane foam 25 kg/m
Structure: pine (Picea Abies; Pinus Silvestris; Pinus Pinaster; Origin:
Europe), plywood (Populus; Eucalyptus Globulus; Pinus radiata;
Betula Pendula; Origin: Europe, Russia), Hardboard (Eucalyptus
Globulus; Origin: Espagne).
Suspensions: zig zag springs.
Feet: beech varnished. (Fagus Sylvatica; Origin: Poland).
Assembly Instructions
Before starting the assembly, identify all components using the
manual.
In order not to misplace components, do not discard the packaging
until complete assembly is completed.
This product must be mounted by an adult.
Plan to assemble the furniture as close to the installation location
as possible.
Mount on a clean, level surface.
Be careful of the risk of pinching / jamming when assembling the
different parts of the sofa.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrest and backrest.
Beware of sharp objects.
Maintenance
Vacuuming or brushing upholstery once a week: Dust accumulation
accelerates wear and dulling of colors.
Sponge up spilled liquids immediately with a clean, dry, dabbing cloth
to absorb liquid. Do not rub, it may damage the fabric. Hue variations
between cleaned and uncleaned surfaces may appear.
Do not place the product near a heat source (radiator, chimney, etc.)
or a source of moisture. Heat and moisture can
damage the product.
Avoid direct and prolonged exposure of the product to sunlight: the
colors may fade.
Flip and tap seats, backrests cushions and armrests regularly so that
they do not wear out and do not get dirty unevenly.
Do not use abrasive products.
For cleaning the covers of the back cushions, please follow the
maintenance conditions mentioned on the label sewn
inside the covers.
If in doubt, call a professional to carry out cleaning.
Renee - 03/2021
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat.eu or
write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
3
.
3 .
1
Keep the label with lot number, it may be useful in case of
BC
complaint.